Replacement Sharpening Diamond Plates and Stones

Regular price $55.00 AUD
Tax included. Shipping calculated at checkout.

Diamond Grit

Quick Description

These are the diamond sheets and blocks to replace worn out sheets for the diamond sharpening system.

What makes it cool…

Unfortunately the diamond surfaces do not last forever, but when the time comes to replace them, it is very easy and fast.

For the coarser grits (#140, #400 and #1200 grits), you can follow this simple procedure:

  1. remove the old diamond sheet by prying it off with a knife
  2. clean the old glue off the aluminium block with some white spirits and a cloth
  3. peel the paper backing off the new diamond sheet
  4. place the new diamond sheet in the desired position on the aluminium block
  5. press down firmly to create a strong bond
  6. The entire process takes 5 minutes and you are ready to keep on sharpening.

 The #3000 grit diamond whetstone comes already bonded to the aluminium block and is ready to use straight out of the packet.

NOTE: there are two versions of the #3000 grit, one has the threaded hole to use with the jig and the other version has no hole and is used for free hand sharpening.


  • Diamond sheets to easily and quickly replace the #140 grit, #400 grit, #1200 grits.
  • #3000 grit diamond whetstone comes already on the aluminium block and is ready to use 
  • two versions of the #3000 grit depending on the system you prefer.